.webp){kind=small}
.webp){kind=small}
Heat recovery systems
Lossnay heat recovery ventilation systems for houses and apartments, DX coil sections, mini heat recovery units and genuine filters.
LGH series filters
Filters for Lossnay LGH ducted heat-recovery units. Clean, timely replaced filters reduce particles in supply air, protect the heat exchanger and keep the design airflow. The manufacturer recommends replacing filters roughly every six months – more often in dusty or…
Ducted heat recovery system
A ducted heat-recovery unit supplies fresh air through ducts to every room you choose and extracts stale air, while the Lossnay plate core returns part of the heat and moisture. It is usually installed in new or renovated houses where…
Heat recovery unit filters
Standard, high-efficiency F7 and activated-carbon filters for MITSUBISHI ELECTRIC Lossnay units. Clean filters maintain air quality and protect the core and fans. The manufacturer recommends replacing them roughly every six months; frequency depends on the environment.Not sure of the model?…
DX coil section
The GUG DX coil section connects to a Lossnay ducted unit and a heat-pump outdoor unit, so supply air is heated or cooled to the set temperature. It is not an ordinary air conditioner: ventilation and air temperature work as…
Mini heat recovery system
Lossnay wall-mounted units need no ductwork – they mount on an external wall, so they suit flats and houses where ducts can no longer be routed. Per manufacturer data in our catalogue they supply 16 to 80 m³/h of fresh…
Start your climate project
Answer a few questions – an EKO2 engineer will assess the site and prepare a quotation covering equipment, installation and commissioning.