.webp)
.webp){kind=small}
PACKAGE / Monobloc ECODAN “Hydro-box” system without cylinderEHPX-YM9D
The price depends on the configuration and installation conditions – an EKO2 specialist prepares a quotation covering equipment, works and commissioning.
PACKAGE / Monobloc ECODAN “Hydro-box” system without cylinder EHPX-YM9D
The compact ECODAN air-to-water Hydro-box system is designed for space heating. For domestic hot water production, a cylinder of the desired volume, specifically designed for heat pumps, can be connected. The Ecodan Next Generation air-to-water heating system is available in two types: Split system – R32 refrigerant circulates between the outdoor and indoor units, and refrigerant work is required for installation and maintenance. Package system – heating water circulates between the outdoor and indoor units, and plumbing work is sufficient for installation and maintenance.
- We size the capacity based on heat losses and room use, not on floor area alone.
- We assess the indoor and outdoor unit locations, pipe run length, condensate drainage and electrical supply capacity.
- Start-up and commissioning are carried out according to the manufacturer’s instructions – this is important for the warranty.
Models
Select models to compare (up to 4).
Technical data
| Data | |
|---|---|
| System type | Package |
| Energy class, heating / W35ºC | A+++ |
| Electric heater (kW) | 9 (3+6) |
| Dimensions (mm) (length x height x depth) | 530 x 800 x 360 |
| Weight (empty – without water) (kg) | 33 |
| Weight (full – with water) (kg) | 38 |
| Max. flow temp. (°C) | 60 |
| Min. flow temp. (°C) | 20 |
| Fuse (A) | 3×16 |
| Voltage (V/Ph/Hz) | 400/3/50 |
| Operating current | 13 |
| Storage min. / max. temperature (°C) | 0-35 |
Data comes from the EKO2ŠILUMA product database based on manufacturer documentation. Before ordering, we check the current manufacturer specification.
See how it works
EHPX-YM9D – 3D diagram
Interactive model: rotate, zoom, click on components.
Compatible with
Indoor and outdoor unit combinations are confirmed by an EKO2 engineer according to the manufacturer’s compatibility tables.
Installation and commissioning
Where already installed
Descriptions of completed projects with this equipment are published with the client’s consent. Projects
FAQ
Does a heat pump work below −25 °C, and does it harm the unit?
A heat pump keeps working at very low temperatures, but its heat output and efficiency fall. The exact operating limits of each model, per manufacturer data, are on the product page – e.g. MSZ-LN-VGHZ with Hyper Heating or the ZUBADAN PUHZ-SHW series. Operating limit and guaranteed capacity are not the same thing – we explain this in Heat pumps for the Lithuanian climate.
Do not switch the heat pump off during hard frosts: starting a cold system at −25 °C or below is not ideal, while continuous operation is easier on the compressor.
Get a quotation for EHPX-YM9D
An engineer will check whether this model suits your building, select the capacity and prepare a quotation including installation and commissioning.