.webp){kind=small}
.webp){kind=small}
DX coil sectionGUG-01SLE
The price depends on the configuration and installation conditions – an EKO2 specialist prepares a quotation covering equipment, works and commissioning.
DX coil section GUG-01SLE
The GUG-01SL-E DX coil section is designed to be combined with a Lossnay LGH-50RVX or LGH-65RVX ducted heat recovery system and a PUHZ-ZRP35VHA series air-to-air heat pump. In this way heating and cooling are provided together with ventilation. Air temperature can be controlled in two ways: via the supply air or via the room exhaust air.
- We size the capacity based on heat losses and room use, not on floor area alone.
- We assess the indoor and outdoor unit locations, pipe run length, condensate drainage and electrical supply capacity.
- Start-up and commissioning are carried out according to the manufacturer’s instructions – this is important for the warranty.
Models
Select models to compare (up to 4).
Technical data
| Cooling capacity (kW) | 3.6(1.6-4.5) |
|---|---|
| Heating capacity (kW) | 4.1(1.6-5.2) |
| SEER/SCOP | 6.8 A++/4.6 A++ |
| Guaranteed heating down to | -11 °C |
| Cooling capacity (kW) | 5.0(2.3-5.6) |
|---|---|
| Heating capacity (kW) | 6.0(2.5-7.3) |
| SEER/SCOP | 6.4 A++/4.6 A++ |
| Guaranteed heating down to | -11 °C |
| Data | |
|---|---|
| Ambient temp. (°C) | 0….+40 |
| Refrigerant | R410A |
| Power supply voltage (supplied from outdoor unit) | 220-240V/50Hz |
| Power input heating/cooling (W) | 2.5/12.4 |
| Operating modes | Heating / Cooling / Auto / Fan* |
| Weight (kg) | 21 kg |
| Dimensions (mm) | |
| Length | 812 |
| Width | 492.2 |
| Height | 330 |
| Exhaust air temperature control | |
| Compatible Lossnay heat recovery units | LGH-50RVX-E |
| Capacity (kW) heating | 6.5 ( 2.4 + 4.1 ) |
| Capacity (kW) cooling | 5.6 ( 2.0 + 3.6 ) |
| Airflow at fan speeds 3 and 4 (m³/h) | 350 – 695 |
| Compatible Lossnay heat recovery unit | LGH-65RVX-E |
| Capacity (kW) heating | 7.7 ( 3.2 + 4.5 ) |
| Capacity (kW) cooling | 6.6 ( 2.6 + 4.0 ) |
| Airflow at fan speeds 3 and 4 (m³/h) | 350 – 900 |
| Compatible heat pump outdoor unit | PUHZ-ZRP35 |
| Maximum pipe length/height (m) | 50/30 |
| Pipe dimensions (mm) liquid/gas | 6.35 / 12.7 |
| Data | |
|---|---|
| Capacity (kW) heating/cooling | 6.5 ( 2.4 + 4.1 ) ,5.6 ( 2.0 + 3.6 ) |
| Airflow at fan speeds 3 and 4 (m³/h) | 350 – 695 |
| Fan speed | 4-3-2-1 |
| Airflow (m³/h) | 500-375-250-125 |
| External static pressure (Pa) | 105-59-26-7 |
| Cooling capacity (kW) | 7.1(3.3-8.1) |
|---|---|
| Heating capacity (kW) | 8.0(3.5-10.2) |
| SEER/SCOP | 6.7 A++/4.5 A+ |
| Guaranteed heating down to | -20 °C |
| Cooling capacity (kW) | 10.0(4.9-11.4) |
|---|---|
| Heating capacity (kW) | 11.2(4.5-14.0) |
| SEER/SCOP | 6.8 A++/4.8 A++ |
| Weight (kg) / panel | -20 °C |
| Cooling capacity (kW) | 12.5(5.5-14.0) |
|---|---|
| Heating capacity (kW) | 14.0(5.0-16.0) |
| SEER/SCOP | 6.4/4.7 |
| Guaranteed heating down to | -20 °C |
| Cooling capacity (kW) | 13.4(6.2-15.3) |
|---|---|
| Heating capacity (kW) | 16.0(5.7-18.0) |
| SEER/SCOP | 6.0/4.5 |
| Guaranteed heating down to | -20 °C |
| Cool. (kW) | 19.0 (9.0-22.4) |
|---|---|
| EER | 2.94 |
| Heat. (kW) | 22.4 (9.5-25.0) |
| COP | 3.23 |
| Cool. (kW) | 19.0 (9.0-22.4) |
|---|---|
| EER | 2.86 |
| Heat. (kW) | 22.4 (9.5-25.0) |
| COP | 3.15 |
| Data | |
|---|---|
| Pipe dimensions (mm) liquid/gas | 6.35 / 12.7 |
| Maximum pipe length/height (m) | 50/30 |
| Cool. (kW) | 38.0 (18.0-44.8) |
|---|---|
| EER | 3.05 |
| Heat. (kW) | 44.8 (18.0-50.0) |
| COP | 3.34 |
| Cool. (kW) | 44.0 (22.4-54.0) |
|---|---|
| EER | 2.57 |
| Heat. (kW) | 54.0 (25.0-62.0) |
| COP | 2.94 |
| Data | |
|---|---|
| Airflow (m³/min) | 163-325-488-650 |
| Weight (kg) | 41 |
| Power source voltage | 240V/1/50Hz |
| Pipe diameter (mm) | 200 |
| Airflow (L/s) | 45-90-135-181 |
| External static pressure (Pa) | 10-38-65-150 |
| Temperature exchange efficiency (%) | 82-78.5-75-72.5 |
| Noise level (dB(A)) | 17.5-24-31.5-37.5 |
| Power input (W) | 20-51-120-245 |
| Dimensions (mm) | |
| Length (mm) | 908 |
| Width (mm) | 954 |
| Height (mm) | 404 |
| Maximum load (A) | |
| Max. | 2.37 |
| Accessories | |
| Standard filter | EU-G4 |
| Remote controller | PZ-62DR-E |
| Electric immersion heater | CV-16-15-1M (1.500 kW) |
*Triukšmo lygis matuojamas 1m nuo įrenginio ir 1,5 m aukštyje nuo grindų. !Suteikiama 5 metų garantija, jeigu įrangos montavimą atliko UAB „Eko2Šiluma“ montuotojai arba atestuoti montuotojai. Atliekame rekuperacinės sistemos projektavimą ir montavimą.
| Rated capacity (kW) | 7.1 (3.3-8.1) |
|---|---|
| SEER* | 5.6 |
| Energy efficiency class | A+ |
| Rated capacity (kW) | 7.6(3.5-10.2) |
| Heat output kW at outdoor temp. -10°C | 4.7 |
| Heat output kW at outdoor temp. -20°C | 3.5 |
| SCOP* | 3.8 |
| Energy efficiency class | A |
| Airflow, m³/h | 3300 |
| Power supply (V/Ph/Hz) | 230/1/50 |
| Maximum operating current, A | 19.0 |
| Recommended fuse (A) | 25 |
| Maximum piping length, m | 50 |
| Maximum height difference between outdoor and indoor units (m) | 30 |
| Pipe diameter, liquid/gas | 3/8?…5/8? |
| Heating | -20…+21 |
| Noise level, dB(A) (heating/cooling) | 48/47 |
| Weight (kg) | 70 kg |
| Dimensions, mm (Height x Length x Width) | 943 x 950 x 330(+30) |
| Cooling** | -15…+46 |
| Cool. (kW) | 22.0 (11.2-27.0) |
|---|---|
| EER | 2.65 |
| Heat. (kW) | 27.0 (12.5-31.0) |
| COP | 3.02 |
Data comes from the EKO2ŠILUMA product database based on manufacturer documentation. Before ordering, we check the current manufacturer specification.
See how it works
GUG-01SLE – 3D diagram
Interactive model: rotate, zoom, click on components.
Compatible with
Indoor and outdoor unit combinations are confirmed by an EKO2 engineer according to the manufacturer’s compatibility tables.
Documents
Documents will be sent on request.
Installation and commissioning
Where already installed
Descriptions of completed projects with this equipment are published with the client’s consent. Projects
Get a quotation for GUG-01SLE
An engineer will check whether this model suits your building, select the capacity and prepare a quotation including installation and commissioning.