6-year warranty on Mitsubishi Electric equipment Kaunas · Vilnius · Klaipėda +370 37 350075 info@eko2siluma.lt
Mitsubishi Electric – Changes for the Better
EKO2ŠILUMA Vilnius

Heat recovery ventilation in Vilnius

In a new house, heat recovery ventilation is not an extra but part of the system. In Vilnius we help you plan, install and balance it so that fresh air stays quiet and heat stays indoors.

Houses being built in the capital today are airtight: high-quality windows, continuous insulation, carefully sealed junctions. In such a building natural ventilation is no longer enough, so mechanical ventilation with heat recovery becomes a necessity rather than a luxury. In Vilnius the question we usually answer is not "do I need a heat recovery unit" but "how do I install it so that the system runs quietly, evenly and is easy to maintain".

When the ducts are already designed

Some new houses and townhouses are handed over with a designed or partly installed duct system. In that case we review the design, check whether the planned unit matches the required airflow and select the right Lossnay model – LOSSNAY LGH-RVX3, VL-CZPVU-R/L-E or LOSSNAY VL-220CZGV-E. For duct connections and distribution we use flexible ducts and accessories.

When you are starting from scratch

If the house is still being designed, we plan the unit position, the intake and exhaust grilles and the duct routes together with heating and cooling. This avoids a duct clashing with the heat pump pipework or the unit ending up next to a bedroom. For help with the complete HVAC solution use our design service; designers can work through EKO2 PRO. We also recommend our article "Choosing a heat recovery ventilator".

For apartments and offices

In existing apartments in the capital without ducts we offer wall-mounted mini units such as the VL-80U5-E. For offices and commercial premises we select commercial Lossnay systems, the LGH-RVX3 or LGH-RVXT; they can be fitted with a GUG-SL-E refrigerant coil section so that the supply air is heated or cooled.

Controls that follow your routine

A Lossnay system can be adapted to your daily schedule: when nobody is home the airflow can be lower, and when guests arrive or after a shower it can be higher. During commissioning we set up the modes together with you and explain how to change them, so that ventilation is effective and never disturbs you with noise, day or night.

Balancing is not a formality

Even the best unit will be noisy or inefficient if the airflows are not balanced. That is why we commission and balance every system and explain the controls and filter changes.

The Vilnius office at Gudelių g. 9 serves the capital and the surrounding districts. Start with the ventilation planner or call +370 603 90004 – we will plan ventilation you will appreciate every day.

FAQ

The house came with ducts but no unit – what now?

Send us the ventilation design or duct layout. We will assess the required airflow and propose a Lossnay unit that fits the existing routes.

Will the unit be audible in the bedroom?

Noise depends on the unit location, duct diameter and air velocity. We take this into account in planning and set the airflows during commissioning.

Can the supply air be cooled in summer?

In commercial Lossnay systems a refrigerant coil section connected to an outdoor unit is used for this. We assess in the design whether it suits your project.

Start your climate project

Answer a few questions – an EKO2 engineer will assess the site and prepare a quotation covering equipment, installation and commissioning.

EKO2 ASSISTANTAnswers based on EKO2 product data. The final decision is confirmed by an engineer.
Hello! Choose a question below or write your own – I will answer from the EKO2 knowledge base.
Compare